TOP

U.FL-R-SMT-1

  • HRS U.FL-R-SMT-1 I-PEX  IPEX Ultra miniature low profile coaxial connectors.
  • Small mouting area.
  • Light weight: 15.7mg
  • Accepts high frequency transmission.
  • Automatic board placement.
  • Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated) cable.
  • Simple connector mating/ unmating.
  • Verification of the fully mated condition.

HRS U.FL-R-SMT-1 I-PEX  IPEX Ultra miniature low profile coaxial connectors.
For the details of dimension, please download our datasheet.

Item Specification Conditions
1. Contact resistance Center : 20 m ohms max.

Outer : 10 m ohms max.

10 mA max.
2. Insulation resistance 500 M ohms min. 100 V DC
3. Withstanding voltage No flashover or insulation breakdown. 200 V AC / 1 minute
4. V.S.W.R.* Part No. Up to 3GHz 3 to 6GHz
U.FL-LP-040 dia.0.81mm Coaxial Cable Assembly 1.3 Max 1.35 Max
U.FL-LP(V)-040 dia.0.81mm Coaxial Cable Assembly 1.3 Max 1.3 Max
U.FL-LP-066 dia.1.13mm Coaxial Cable Assembly 1.3 Max 1.4 Max
U.FL-LP-066 dia.1.32mm Coaxial Cable Assembly 1.3 Max 1.5 Max
U.FL-LP-062 dia.1mm Coaxial Cable Assembly 1.3 Max 1.3 Max
U.FL-LP-088 dia.1.37mm Coaxial Cable Assembly 1.3 Max 1.4 Max
5. Durability

(mating / un-mating,

with corresponding plug)

Contact resistance

Center : 25 m ohms max.

Outer : 15 m ohms max.

30 cycles
6. Vibration No electrical discontinuity of 1μs min.

No damage, cracks or parts dislocation.

Frequency: 10 to 100 Hz, single amplitude of 1.5mm, acceleration

of 59m/s2, for 5 cycles in the direction of each of the 3 axis.

7. Shock Acceleration of 735 m/s2, 11ms duration, sine half-wave

waveform, 3 cycles in each of 3 axes.

8. Humidity

(Steady state)

No damage, cracks or parts dislocation.

Insulation resistance 10 M ohms min.(humidity high)

Insulation resistance 500 M ohms min.(dry)

96 hours at temperature of 40c and humidity of 95%.
9. Temperature cycle No damage, cracks or parts dislocation.

Contact resistance: 25 m ohms max. (Center)

15 m ohms max. (Outer)

Temperature: -40˚C/+5 to +35˚C /+90˚C/+5 to +35˚C

Time: 30min./ 3min. /30min./ 3min.

5 cycles

10. Salt spray No excessive corrosion 5% salt water solution, 48 hours
DATASHEET
File NameTypeUpdatedDownload
U.FL-R-SMT-1PDFDownload
U.FL-R-SMT-1(10) drawingPDFDownload