The REYAX RYS8830 is built on the high performance of the SONY CXD5605GF CXD5605AGF GNSS engine.
The RYS8830 modules utilize concurrent reception of GNSS systems offering high sensitivity in a small SMD form factor.
| Item | Min. | Typical | Max. | Unit | Condition |
| Power Supply Voltage | 1.71 | 1.8 | 1.89 | V | VDD |
| 0.9 | 1.8 | 1.95 | V | VDD_LDO_IN | |
| GNSS continuous mode | |||||
| Satellite acquisition Current | 19 | mA | |||
| Satellite tracking Current | 13 | mA | |||
| Idle Current | 3.7 | mA | Waiting for command | ||
| Sleep2 mode current | 200 | uA | |||
| Satellite acquisition Current | 11.5 | mA | Use buck regulator | ||
| Satellite tracking Current | 8.2 | mA | Use buck regulator | ||
| Idle Current | 3.3 | mA | Use buck regulator | ||
| Sleep0 mode current | 0.5 | mA | Use buck regulator | ||
| Sleep1 mode current | 0.26 | mA | Use buck regulator | ||
| Sleep2 mode current | 0.26 | mA | Use buck regulator | ||
| GNSS low power mode | |||||
| Satellite tracking average current |
2.6 | 8.2 | mA | Use buck regulator @GSOP command Sleep1 and normal mode cycle |
|
| I2C slave | I2C clock : 400kHz
Address length : 7 bits Slave address : 0x24 |
||||
| Default Baud Rate | 115200 | bps | 8,N,1 | ||
| Digital input level high | 0.7*VDD | VDD+0.3 | V | VIH | |
| Digital input level low | -0.3 | 0.3*VDD | V | VIL | |
| Digital output level high | 0.8*VDD | VDD | V | VOH 2mA | |
| Digital output level low | 0 | 0.2*VDD | V | VOL 2mA | |
| Flash size | 8 | M-bit | |||
| GNSS Center Frequency | 1561.098
1575.42 1602.5625 |
MHz | BeiDou
GPS Glonass |
||
| Navigation update rate | 1 | Hz | |||
| Accuracy | 1 | M | Signal strength is -130dBm | ||
| Cold starts | 35 | Sec. | Signal strength is -130dBm | ||
| Hot starts | 1 | Sec. | |||
| Tracking Sensitivity | -161 | dBm | |||
| Hot starts Sensitivity | -160 | dBm | |||
| Cold starts Sensitivity | -147 | dBm | |||
| Operating Temperature | -40 | 25 | +85 | ˚C | |
| Dimensions | 11mm*11mm*2.2mm | ||||
| Weight | 0.43 | g | |||